Welcome Guest !
Difficulty Level
1.  PIC Basic - Servo Motor Control Using PIC16F877A   PRO133

In this project we will explain how servo motors work and demonstrate two different types of servo motors in action, a full rotation and a partial rotation servo, using PIC16F877A microcontroller. Pulse width modulation (PWM) required for servo motor is achieved using the compare module (CCP) available with the PIC micro.


Estimated cost for building this project is Rs 1271
Age: 17+   Difficulty:  Intermediate
  Post Comment  
  View Project  
2.  PIC Basic - Interfacing With Polstar GPS PMB-688 Having SiRF starIII IC   PRO134

In this project a widely available GPS module PMB-688 is interfaced with PIC16F877A using UART communication protocol. THe NMEA stadated text strings output by the GPS module is displayed on2X16 LCD display. It is possible to extract time, location , altitude and speed from these NMEA strings.


Estimated cost for building this project is Rs 3741
Age: 17+   Difficulty:  Experienced
  Post Comment  
  View Project  
3.  PIC Basic - Three Wire Interfacing with an LCD Screen JHD162A   PRO130

This project will show you how an LCD can be interfaced with a PIC using just 3 pins of the PIC. Project uses an LCD, JHD162A and IC74174 as shift registers. The PIC interacts with the LCD in a 8-bit mode.


Estimated cost for building this project is Rs 604
Age: 17+   Difficulty:  Intermediate
  Post Comment  
  View Project  
4.  PIC Basic - Interfacing With Real Time Clock DS1307   PRO132

An intermediate level PIC based project aimed at demonstrating interfacing PIC with a Real Time Clock with battery backup. Project uses the real time clock DS1307 and uses two wire I2C protocol to interact with it. The time is displayed on an LCD screen and also on a set of seven segment displays.


Estimated cost for building this project is Rs 1354
Age: 17+   Difficulty:  Intermediate
  Post Comment  
  View Project  
5.  PIC Basic - Interfacing With an LCD Screen JHD162A   PRO129

An intermediate level PIC based project aimed at demonstrating interfacing PIC with a two line LCD screen. Project uses an LCD, JHD162A, which comes with HD44780 compatible driver. The PIC interacts with the LCD in a 4-bit mode.


Estimated cost for building this project is Rs 527
Age: 17+   Difficulty:  Intermediate
  Post Comment  
  View Project  
6.  PIC Basic - DC Motor Direction Controller using H-Bridge   PRO128

A beginner level PIC based project aimed at learning of, controlling a DC motor direction using press-button switches. This project uses both port A and B of PIC16F84A and uses interrupts to handle switch operations.


Estimated cost for building this project is Rs 493
Age: 17+   Difficulty:  Beginner
  Post Comment  
  View Project  
7.  PIC Basic - Interfacing Motion Detector PIR SE-10   PRO127

A beginner level PIC based project aimed at using a motion detector SE-10 in conjunction with PIC. Demonstrates how Passive infrared sensor (PIR) signal can be detected and use it to turn ON a light or an alarm for a specified duration of time.


Estimated cost for building this project is Rs 972
Age: 17+   Difficulty:  Beginner
  Post Comment  
  View Project  
8.  PIC Basic - Blinking LEDs   PRO126

A beginner level PIC based project aimed at learning PIC programming and controlling simple interfaced components like LEDs. Demonstrates program used for blinking six LEDs connected to PORT-B pins of PIC MCU.


Estimated cost for building this project is Rs 345
Age: 17+   Difficulty:  Beginner
  Post Comment  
  View Project  
   1 | 2 | 3   Next
Social Likes
Join EFKids Club


text image
* Enter the text above for captcha
Join EFKids Club to get notified when new projects are added.


Electronics For Kids Copyright 2010 - 17 .   EFKids
About EFKids